BANDO Synchronous Belt 337L050
■ Usable with a small pulley with a pitch diameter of 5.09 mm! Because of the thin belt and cords (especially the polyester specification), Type TN10 fits well even with a pulley with a pitch diameter of 5.09 mm.
■ High torque with low power consumption! The belt flex resistance and power loss by slipping are small, and the bearing load due to the initial tension can also be reduced. It can transmit higher torques than rubber rectangular belts or flat belts. Decelerated drive can reduce power consumption compared to DD (direct drive).
■ Little rotation non-uniformity! The small belt pitch makes the pitch line close to a perfect circle when the belt is wound around a pulley. Therefore, it provides smooth rotation close to that of flat belts at accurate revolutions.
■ No backlash! The triangular teeth at an angle of 70° mesh in contact with both wall surfaces of the pulley groove, causing no backlash.